Custom Static Clings

Clear, White and Inside-Facing Clings

The choice of film depends on where the cling will be read from. Clear cling lets the glass show through around your design, so the graphic looks painted onto the window. It works best for designs with a strong outline and dark or saturated colours, because pale colours on clear film can look faint against daylight.

White cling has an opaque white base, so colours look as bright as on paper. It suits photographs, full panels and anything that needs to be seen against a busy background. A white base can also be printed under selected areas on clear film to make logos and text pop.

For signs placed on the inside of a window but read from the street, the design is printed in reverse on the film, so it reads correctly through the glass. This protects the print from rain and passers-by and keeps it in place where it cannot be peeled off from outside. Our clear static clings for glass page covers the see-through film in more detail.

Designing Clings That Read From a Distance

Window graphics are read by people walking past, often from a few metres away and at an angle. Large, simple lettering with strong contrast beats small text every time. Opening hours, for example, should be readable without stopping, so allow generous line spacing and avoid thin decorative fonts.

Consider what is behind the glass. A dark shop interior makes white and bright colours stand out, while a bright interior or a reflective window may need a white-backed cling for the design to be visible. If you are not sure, send a photo of the window and we can suggest the best film.

Die-cutting to the shape of the design, rather than leaving a rectangle, gives a cleaner look on clear film. Simple outlines around a logo or a speech bubble shape around an offer work well.

Think about the view from inside as well. A face-out cling on clear film shows its blank reverse to the room, which is fine on a back door but noticeable on a café window where customers sit. Printing a simple design on the second side, or choosing a white cling, keeps the inside view tidy. If you need a design that stays put for good, adhesive custom vinyl stickers are the permanent alternative.

Sizes for Doors, Windows and Vehicles

Clings can be printed from a small round sign the size of a coaster up to large window panels. For doors, a strip across eye level for opening hours or a narrow band at handle height for a safety marker is common. Larger clings are easier to fit in two or three pieces, as a single big panel can trap air and be awkward to handle on a ladder.

Measure the glass you have rather than the frame, and leave a margin around the cling so it does not curl over seals or beading. For vehicles, check where the cling will sit relative to wipers, tints and heated screen lines. For painted door panels, printed car door magnets do the same removable job.

If your window has a frosted band or a manifestation strip already, plan the cling around it rather than over it. Clings do not grip well on textured or etched glass, so position them on the clear areas. Sending a quick photo with rough measurements is usually the fastest way to agree a size that suits the space.

Fitting and Reusing Your Clings

Clean the glass first and dry it thoroughly. Peel the cling from its backing, place it at the top edge, and smooth it down from the centre outwards with a soft cloth or squeegee to push out air bubbles. A light mist of water on the glass can help you slide it into position before smoothing.

To store a cling for reuse, put it back on its original backing sheet and keep it flat, away from heat and dust. Dust on the cling surface is the main reason it loses grip, and a quick rinse in clean water and a careful dry usually brings it back. Clings for car windows can be paired with long-lasting custom car stickers for details that stay on all year.

Ordering Static Clings

Let us know the size, the number of designs, whether you need clear or white film, and whether the cling will face out or be read through the glass. We send a free design proof so you can check orientation and colours, and production takes 4 to 7 working days after approval. Your clings then travel free by tracked courier to any UK mainland address. Send the details and we will respond with a custom quote within one working day. You can also browse the wider labels and stickers range for adhesive options.