Custom Wallet Boxes

Inserts That Hold the Leather Without Marking It

Leather can take an impression if it is pressed hard against a ridge for weeks, so the insert should support the wallet evenly. A shallow foam bed covered in velvet or a smooth card platform with a cut-out recess both work well. For long wallets and travel wallets, a recess a few millimetres deeper than the wallet stops the lid pressing down on the surface.

Matching sets, such as a wallet with a key fob or belt, need a multi-pocket insert. Send us the pieces, or their measurements and photos, and we will plan the layout so every item sits flat and nothing rubs against anything else in transit. The clearances around each pocket follow our guide to measuring a product for packaging.

Materials, Colours and Branding Details

Rigid boxes are made from thick greyboard wrapped in paper. Black, chocolate brown, tan, navy and deep green wraps sit naturally beside leather. Textured papers with a linen or leather-grain feel add depth, and a kraft wrap suits workshop brands with a rugged, handmade identity. Inside, a contrasting colour, such as a tan interior in a black box, gives a small surprise when the lid comes off.

For printed folding cartons, white or kraft folding boxboard takes full colour print and can be matt laminated to resist scuffs during shipping.

Interior colour is worth thinking about. A tan or cognac wallet in a tan-lined box can look washed out; a black or deep blue lining makes the leather glow. If your range comes in several leather colours, a neutral grey or black interior suits them all.

Some makers like to include a small cotton dust bag inside the box for long-term storage. If you do, allow a few extra millimetres in the depth so the lid still closes without squeezing.

Leather brands usually prefer restraint. A foil logo in gold, silver, copper or black on the lid is the most popular finish, and blind debossing, where the logo is pressed into the board without colour, echoes the stamped mark many makers put on the leather itself. A printed message inside the lid, such as care advice or a short note from the maker, is seen at exactly the right moment.

Small details make a difference: a ribbon pull on drawer boxes, a fabric hinge on magnetic boxes, and a belly band around the outside for a limited or gift edition without reprinting the box.

Keep the logo modest in size. On a slim wallet box, a mark around 30 to 40 mm wide usually looks balanced; anything larger can feel loud next to fine leather.

Measuring Wallets for a Proper Fit

Measure the wallet closed, at its thickest point, including any card already inside if you will ship it that way. Bifolds vary a lot in thickness depending on the number of card slots and the weight of leather. Add a few millimetres all round for the insert, and tell us whether the wallet is sent empty or with a sample card.

If you sell several sizes, from a slim card sleeve to a long continental purse, it can be more economical to choose two box sizes with different inserts than a separate box for each item.

Weigh up whether to show the wallet straight away. Some brands wrap it in tissue paper on top of the insert for a slower reveal, which means leaving a little extra depth above the leather.

Wallet Boxes for Corporate and Wedding Gifts

Wallets and card holders are common corporate gifts for clients and long-serving staff, and they are a favourite groomsmen present. In both cases, presentation matters as much as the leather. Corporate buyers often want their own company logo on the lid alongside, or instead of, the maker's mark, and we can foil both if needed. A short message inside the lid works well for thanking a client or marking a work anniversary.

For weddings, a box in the wedding colours with each groomsman's name on a small printed card tucked under the wallet adds a personal touch without printing each box separately. Ordering a few spare boxes covers last-minute additions to the party.

Where wallets are personalised with initials, allow time for the leather stamping before the boxes are needed, and confirm the box depth with a stamped sample, since some heat-embossing slightly changes the thickness. Groomsmen sets that pair a wallet with braces are boxed as one in the braces boxes with a two-pocket insert.

Measure the Wallet Closed and Say Whether It Ships Filled

A wallet box is cut to the wallet at its thickest, which is a different figure for an empty bifold and one shipped with a card and a note inside, so decide how it goes out before measuring. Close the wallet, measure length and width, then press it gently and measure the thickness at the fold; add 5 mm to each. If you sell a card holder and a long wallet from the same workshop, send both sets of figures and ask whether one tray with two inserts is cheaper than two boxes. Choose the lid style by the shop: lift-off for a counter, drawer for a gift. Makers who also box a belt or tie keep the same wrap on their tie boxes in a matching wrap.

Send the logo as a vector for foil or deboss. Email the measurements, style, insert type, wrap and quantity, and a custom quote comes back within one working day, followed by a free design proof showing the insert. Boxes are made in 4 to 7 working days once approved and delivered free and tracked on the UK mainland in 2 to 3 days. Boxes that arrive crushed or scuffed are replaced or refunded when reported within 10 days.