Custom 6 oz Paper Cups for Short Drinks

Single Wall, Double Wall and Lid Fit

Single wall cups are the standard choice for drinks that are handed over and drunk quickly. They are light and economical, and some cafés pair them with a sleeve for the hottest drinks. Double wall cups add an outer layer with an air gap between the two, keeping the outside cooler to hold, which suits takeaway espresso drinks served very hot.

Cups are made from food-contact cupstock with an inner lining for hot drinks. The lining sits on the inside face only, so your print on the outside stays crisp and does not come into contact with the drink.

Lid fit depends on rim diameter. A 6oz cup typically has a rim of around 70mm to 73mm, but this varies between makers. If you already hold lids, tell us the lid rim size and we will confirm the cup matches before anything is printed. A sip lid with a small opening suits espresso drinks; a flat lid suits children's drinks with marshmallows on top.

Ripple wall cups are a third option. Their corrugated outer layer gives a firm grip and good heat protection, and the ridged surface feels distinctive in the hand. They cost a little more than single wall but usually remove the need for a separate sleeve. If most of your menu is already double wall, the double wall paper cups in larger sizes use the same board and lining, so the set matches in the hand.

Printed 6 oz Paper Cups that Carry Your Brand

Printed 6 oz paper cups have a smaller print area than larger sizes, so simple designs work best. A clear logo, one brand colour and perhaps a social handle fill the wall without crowding it. Wraparound patterns suit small cups well and tie a set of different sizes together on the counter.

If you already print 8oz and 12oz cups, send us those files. We scale the artwork to the 6oz template so the logo sits in the same place and at the same proportion, and the proof shows the cups side by side so you can check they read as one family.

Keep fine lines and small text away from the rim and base, where the print can stretch slightly as the flat blank is wrapped and sealed into a cup. Your proof marks the safe area clearly, along with the seam position.

Kraft cups with a single dark ink give an understated look that suits roasters with a craft identity, while white cups show bright brand colours at their truest. Our comparison of print and finish options side by side shows what a single Pantone looks like next to CMYK on cupstock.

6 oz Paper Cups with Logo for Events and Tastings

Food and drink brands use 6 oz paper cups with logo printing for sampling at trade shows, in-store tastings and outdoor events. A branded tasting cup carries the name of what someone tried away from the stand, which a plain cup cannot do. Soup makers, juice brands, hot chocolate brands and breweries all use the size for exactly this.

Small cups tip easily on a busy stand, so think about how samples will be carried. A cup carrier or a printed tray lets staff walk a row of samples through a crowd and gives you another surface for the brand. Four-cup printed carriers for sample rounds are cut to the same 73 mm rim.

Base the quantity on expected visitors and how many samples each person is likely to take, rather than a round number. A tighter estimate leaves fewer cartons to store after the event.

Storage and Ordering Tips for Cafés

Paper cups are delivered in sleeves inside cartons, nested to save space. Keep them dry and off the floor, as damp cartons can soften and warp the cups. Use older sleeves first, and keep one sleeve of 6oz cups beside the espresso machine rather than under the counter, so baristas reach for the right size without thinking.

Count your short drinks for a few weeks before you order. It is easy to guess low, run out of small cups and fall back on 8oz, which undoes the reason for buying them.

Coffee vans have even less room to spare. Order in quantities that fit the van, and keep a reserve carton at home or at your unit so a busy weekend does not leave you without the right size. Vans that run single wall cups usually keep printed sleeves for hot single wall cups on the same shelf, so larger drinks get a grip without a second cup.

Check the Lid Before You Order 6oz Cups

The measurement that decides everything on a 6oz cup is the rim, not the volume printed on the sleeve. Lids are matched to rim diameter, so a 73 mm cup will not take the 80 mm sip lids you may already stock. Measure a lid you hold across its inside edge, or send us the lid maker's code, and we match the cup to it before the proof is drawn. Starting from nothing? Order cups and lids together so the pairing is tested once. If your samples are smaller still, the 3oz tasting cup for single mouthfuls is ordered the same way.

Artwork is simpler than on a 12oz cup. Prepare a logo in one or two flat colours, a short line of text and nothing finer than a 0.5 mm stroke, and leave the seam and rim band clear. Email the wall type, colour count and quantity and a custom quote comes back within a working day, followed by a free design proof. After approval the cups print in 4 to 7 working days and travel free and tracked to UK mainland addresses in another 2 to 3. A misprinted sleeve reported within 10 days is reprinted or refunded.